Frequently Asked Questions
Best 10-Socket Wall Charging Board Manufacturer | Chiang Mai, Thailand - CE OCPP Wanlin
Executive Summary: 10-Socket Wall Charging Board for Global Buyers
Bottom line The WL-WM10 puts ten metered sockets on an IP54 steel panel, each metered and fused, with a feeder-matched group cap and per-socket auto cut-off. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Hard numbers from the trial with resale margins holding at 32% across the first season for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Chiang Mai Condo Management Buyer Sourcing Success
It looked like a routine RFQ until the buyer mentioned what the last batch cost them. Distributors who bought generic charging boards on price alone spent the season managing burned sockets and billing disputes.
Once the first 200 charging sessions reported back, Aung Kyaw Moe selected Wanlin as their EV charging manufacturing partner. The purchasing manager signed after comparing failure modes, not just port counts and prices.
- SMT lines run three shifts and every charging board gets an automated function test before enclosure
- RCD, surge and overload protection are function-tested on samples from every lot, not by design alone
- custom tariff tables and display languages are flashed at the factory, not left for the buyer to manage
Standing in the depot, the buyer ran a full 12-port load while the site breaker held and the display cycled port statuses.
Problem Analysis & Field Report: Why Global Buyers Need 10-Socket Wall Charging Board
The failure was intermittent, which made it expensive to ignore. A shop-house owner documented one tripped group breaker killing all ten sockets every laundry evening.
Field case: A shop-house row in Chiang Mai split a tripping group breaker across the WL-WM10 capped load groups. Laundry evenings no longer cut charging, and the owner added a second board for the row delivery riders.
Why it matters for global buyers:
- unattended overnight charging swells packs without per-socket cut-off
- the fix was firmware timers behind lock covers
- load groups stop one appliance evening from killing every socket
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin 10-Socket Wall Charging Board
Under the enclosure, the design separates metering from switching so readings stay stable at full load.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Sockets | 10 metered sockets with individual breakers |
| Load Management | group load cap set in firmware |
| Billing | per-socket kWh metering with QR payment |
| Timers | per-socket charge timer with auto cut-off |
| Protection | per-socket overload, leakage and surge |
| Housing | IP54 steel panel with IK10 rating |
| Display | LCD with per-socket status and cumulative kWh |
| Installation | surface mount on shed wall or column with anchor kit |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Apartment corridor bike parking | WL-WM10 | Per-socket cut-off stops batteries cooking all night |
| Parking garage wall | WL-WM10 | Metered sockets end the garage flat-fee argument |
| Shop house back wall | WL-WM10 | Tenants pay for exact kWh with QR payment |
| Dormitory bike area | WL-WM10 | Firmware timers behind lock covers stop tampering |
| Warehouse staff wall | WL-WM10 | Group load cap keeps the warehouse feeder safe |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- SMT lines run three shifts and every charging board gets an automated function test before enclosure
- RCD, surge and overload protection are function-tested on samples from every lot, not by design alone
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
Ranked on what caused the previous supplier to lose the account, the factory scored first on every row that mattered.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
From the first sample request to the sailing date, the buyer could see each gate in writing. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
Three buyers who ran the same evaluation shared what they told their purchasing committees.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The cabinet survived a monsoon season on an open shed wall. That story sold more units than our ads did."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "I have bought from four factories in this category. This is the first one whose meter readings matched the utility bill."
- Aung Kyaw Moe (Condo Management Buyer, Chiang Mai, Thailand): "We changed the cabinet color and the decal set and kept the same power core; the line looks new without a new tooling budget."
Frequently Asked Questions
Q: How does the WL-WM10 stop overnight overcharging?
A: Each socket runs a timer with auto cut-off, so packs stop drawing at the set time or full-charge signal.
Q: Can the load cap match our building wiring?
A: Yes, the group ceiling is set in firmware to the feeder rating the building actually has.
Q: What prevents residents from resetting timers?
A: Timer settings sit behind a lockable cover; riders only see socket status and QR.
Q: Is billing per socket or per board?
A: Per socket, with QR payment and kWh logs exported for building management.
Q: Can it mount on an outdoor shed wall?
A: Yes, the IP54 panel handles shed and column mounting with the included anchor kit.
Project Summary
Hard numbers from the trial By working directly with manufacturer Wanlin, the Condo Management Buyer team in Chiang Mai reached 32% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China